Electric Tapping Arm IMQ-12
The Electric Tapping Arm IMQ-12 is suitable for tapping 3mm – 12mm. The adjustable RPM speed range from 0~400 make this unit suitable for tapping a variety of materials. The work range of the arm is between 100mm and 950mm from the mounting point.
The IMQ-12 comes complete with the electric tapping spindle, parallel and slanted tapping arm; table mounting column and customers choice of 6 quick release TCS1B Adaptors with Safety Clutch to mount taps to the electric spindle. The IMQ-12 does not come with any machine taps.
Furthermore the IMQ-12 is suitable for workshops or areas where compressed air is not available and customers are unable to consider a pneumatic tapping machine.
Available 1B adaptors are listed on our Tap Shank Dimensions page.
|
Tap Size
|
M3~M12
|
|
|---|---|---|
|
Speed (rpm)
|
0~400
|
|
|
Work Range
|
Max
|
950mm
|
|
Min
|
100mm
|
|
|
Voltage
|
220V - Single-Phase
|
|
|
Electric Motor
|
0.55 kw
|
|
|
Adaptor with Safety Clutch
|
||
TM800035 Various Degree Tapping Device - enables you to use any degree up to 90 degree for angled jobs requiring tapping.
TLM-300 Portable and moveable magnetic base - allows the customer to move the tapping machine to material that would not otherwise be able to be tapped. The magnet clamps to a metal base via a lever. Therefore you can mount the tapping arm to the magnet so you can tap the material where required.
TM800030 Automatic tap lubricator system - supplies lubricant to the tapping tool whilst working
TM800032 Cast Iron Work Cart - able to be moved around and stabilized with legs that lock in. Has cast iron t-slots on the surface.
8H Drill Chuck - Turn your tapping machine into a 0-8mm (0-5/16") drill. You will also require the TC1/JT2 Drill Chuck Adaptor.
13H Drill Chuck - Turn your tapping machine into a 0-13mm (0-1/2") drill. You will also require the TC1/JT6 Drill Chuck Adaptor.
